FEATURES Display readings : Three semi-liquid crystal display, maximum

FEATURES

Display readings : Three semi-liquid crystal display, maximum reading low-frequency 1999V/M / High Frequency 1999μW/cm2.
Level : low-frequency V/m, high-frequency: μW/cm2
Wide range of detectable frequency
It can detect the electromagnetic radiation everywhere
Comply with CE
Easy to operate, it can detect the power of electromagnetic radiation around home
Portable and lightweight

Specifications

Dimensions (5.28 x 2.83 x 1.18)" / (13.4 x 7.2 x 3)cm (L x W x H)
Color Black
Material Metal & Plastic
Modle DT1130
Measurement time intervals 0.4 seconds
Operation voltage 9V
Measure frequency range low frequency: 50Hz-400KHz; high frequency: 30MHz-2000MHz
Operation temperaturer -15°C - 60°C
Power Supply 1 x 6F22 9V Battery(Not Included)
Battery Capacity 800mAh

Package Includes

1 x Electromagnetic Radiation Detector
1 x English / Chinese User Manual

Extra Info

Measuring Steps:
1.Switch on the radiation tester and aim at the testing object.
2.Hold the tester and slowly close to the object until the tester touches the object.The shorter the distance is, the greater the radiation it has.(Notice: For high-voltage object, it is advisable to keep the tester a certain distance away from the object.)
3.Change the angle of the tester during the test to achieve accurate measurement.
4.Keep the object on during measurement. If you switch off the device during the process and there is no device nearby, the figure in the tester will become zero.

Notes:
1.The dosimeter is for testing the electric field radiation. If the test equipment earthing shielded, the test would fail.
2.Metal will shield the radiation, too.
3.If the meter keeps display "0" while testing, please change a battery and test again.

@Topshall 17 נקודות @Topshall /2" עוקבים